CLEVER PU 400 BT-1K RAPID

Description

CLEVER PU 400 BT-1K RAPID; Apply with a brush, a spatula or

a roller in at least two layers. After first layer is applied minimum

4 hours max 8 hours, second layer should be applied. Do not allow

coating to remain in the application equipment longer than 2 hours.

Flush out all application equipment whenever there is a delay in

application. In case of airless spray application, it has to be thinned

with xylene.

Fast curing.

• Never bubbling during the curing process.

• Simple application (by brush or spatula).

• When applied forms seamless membrane without joints.

• It is based on elastomeric hydrophobic polyurethane resin

• It provides permanent elasticity up the -40 ˚C to +90 ˚C.

• Resistant to chemicals.

• Provides water vapor permeability, so the surface can breathe,