CLEVER PU 130

Description

CLEVER PU 130; Apply the mixture with a brush or a roller in

minimum two layers. After first layer is applied minimum 12 hours

max 24 hours, second layer should be applied. Do not exceed

48 hours between each coats. Do not allow coating to remain in

the application equipment longer than 2 hours.

• Economical,

• Simple application (brush, roller or airless spray),

• When applied forms seamless membrane without joints,

• As it is pure polyurethane, it can continually contact with water.

• Maintains its mechanical properties over a temperature span of

-30˚C to +80˚C,

• Provides water vapor permeability, so the surface can breathe,

• Even the membrane gets damaged, it can be easily repaired

locally within minutes.